DHP 200 B Zone II
Characteristics of all our Hydraulic Powerpacks:
- All components enclosed within a protection/ lifting frame.
- The protection/lifting frame is made from high tensile, sea water resistant aluminum and is coated with a two component paint system.
- A dashboard is incorporated in the protection/ lifting frame to check and control the: engine running hours, engine / motor speed & temperature, lubricating oil pressure, hydraulic oil pressure & temperature.
|Maker / Type||Deutz BF6m1013, turbocharged, water cooled|
|Start System||Pre-engaged spring starter|
|Air Inlet||Dry filter with dust cyclone, visual dirt indicator water separator and emergency stop valve|
|Exhaust System||Discom silencer/spark arrestor (ATEX approved)|
|Fuel System||Double filter, including water separator|
|Fuel Type||Automotive diesel|
|Fuel Consumption||38 ltr/hr|
|Fuel Tank||450 litres large basement tank, including filler/breather cap, drain and gauge glass|
|Indicators / Safety Features||Engine temperature and oil level low light – Automatic over speed air intake shutdown valve – Automatic mechanical over speed shutdown valve – Automatic exhaust temperature shutdown – Automatic oil temperature shutdown – Exhaust flame trap and engine breather flame trap – AMOT control system|
|Pump Type||Axial plunger with variable settings|
|Flow||200 litre/min maximum|
|Pressure||320 bar maximum|
|Filter System||Full flow 10 micron, including magnet element and visual dirt indicator|
|Oil Type||ISO 46|
|Oil Tank Capacity||300 litres large, complete with filler/breather cap, drain and gauge glass|
|Cooling||Air cooled, thermostat controlled and intergraded with diesel engine|
|Connections||High and low pressure valve Snap-On couplings for connection of extension hoses(not interchangeable)|
|Dimensions||L 2300 x W 1400 x H 1960 mm|
|Weight (dry)||2250 kg|