FiFi-750 unit, (750 m3/hr@12 bar/3250 GPM@180 PSI), based upon centrifugal pump directly coupled to flywheel side of diesel engine. Including a hydraulic pump to drive boost pump at the front side of engine, hydraulic oil tank, filter, cooler and thermostat.

Unit is build on a light weighted aluminium skid including fuel tank suitable for installation on deck.

Total weight of one unit : 2500 Kgs.

Total dimensions of one unit (L x W x H) : 2400x1150x1900 mm 7.9 x 3.8 x 6.2 Ft.

Also available as containerised model.


Make/type Volvo Penta/D9
Rating 420 kW @ 2000 rpm / 575 HP @2000 rpm, according ISO 3046.
Start system Electric with battery, incl. battery charger for 220 V/50 Hz.
Fuel system Basement integrated tank of 500 litres / 132 gallon. Sufficient for eight running hours
Cooling system Sea-water cooled heat exchanger is mounted on the engine and fed by a direct driven cooling waterpump. Suction via inlet of Fi-Fi pump.
Exhaust system Sea-water cooled exhaust manifold, water injected and fed by engine’s cooling waterpump.
Safety system Auto shut-down in event
– low lubrication oil pressure.
– high engine temperature
– over speed


Make/type Pioneer pump/Single stage
Capacity/pressure 750 m3/hr@12 bar/3250 GPM@180PSI
NPSH at 2000 rpm 4 mtrs. max
Power consumption 300 kW / 402 HP
Material casing Nod. Cast iron GG40. Coated inside
Impeller Stainless steel CA6NM
Shaft Stainless steel 17-4-HP
Discharge flange DN 200/PN 16 acc. to DIN 2633
Suction flange DN 250/PN 16 acc. to DIN 2633.


Make/type HR 377
Capacity 12.000 ltr/min. / 3170 GPM max.
Inlet pressure 12 bar / 180 PSI
Throw length 130 mtr. / 426 ft. max. for water
Working pressure 16 bar / 232 PSI max
Reaction thrust 1000 Kgs. maximum
Control Manual
Swivelling range Horizontal: Rotating infinite vertical: 120o total
Material body/nozzle SS 316
Bore water nozzle 73 mm


Type PV600
Mixing ratio 0.4 – 6%
Hose manifold 6 off 2½” connections